烧结风机 您当前的位置:首页 > 产品展示 >烧结风机

烧结离心风机系列

本系列烧结离心鼓风机系钢板焊接机壳,机壳内部采用钢管支撑筋,外部设计有型钢加强筋,结构合理,刚性好。壳体与轴承箱为同-中心高度,安装方便,热胀量影响小,稳定性好。

产品简介

本系列烧结离心鼓风机系钢板焊接机壳,机壳内部采用钢管支撑筋,外部设计有型钢加强筋,结构合理,刚性好。壳体与轴承箱为同-中心高度,安装方便,热胀量影响小,稳定性好。采用有限元法计算程序计算转子的临界转速和叶轮强度,准确可靠,确保机组的平稳运行,安全可靠。以高效模型为基本级,模化设计,性能可靠,工况范围宽。叶轮和机壳内部采用先进的防磨措施,使用寿命可提高3~5倍。


The sinter plant fan is of steel plate fabricated casing with steel piping supports inside thecasing and formed steel reinforcement outside the casing, which is reasonable in constructionand characterized by good rigidity.The casing is in the same centre height with the bearingpedestals, which is easy for installation,ess influence from thermal expansion and excellencein stability.Computer software with finite elementmethod is adopted to calculate the critical speed ofrotors and impeller strength,resulting in accuracy andreliability and thus the stable and safe operation oftrain is ensured. Simulation design with high efficientbasic stage model leads reliable performance andwider operating range. Advanced anti-erosionmeasures are taken for impellers and casinginternals, while increasing the 


相关产品

请输入搜索关键字

确定
0.0691s